select * from artware_news where N_YN = 1 and find_in_set(N_Class , '4') and (N_ST <= '2026-04-21' and N_ET >= '2026-04-21') 【最新活動】跨領域工作坊:IQ Light 大挑戰 | 國立中興大學圖書館 | National Chung Hsing University Library
:::
最新消息

【最新活動】跨領域工作坊:IQ Light 大挑戰

活動快訊

作者 資訊組 | 發佈日 2026-04-13

【最新活動】跨領域工作坊:雷切IQ Light 大挑戰

<通過課程可取得雷射雕刻切割機 認證資格>

 IQ light是丹麥設計師Holger Strøm發明的獨特設計:由可互鎖四邊形構成,由不同的四邊型片數,並透過模組的連接變化出至少22種以上的形狀和尺寸的造型。

 我們不止玩立體結構,同時也玩平面設計!利用雷射雕刻切割機,讓IQ light上也能show出自己個性化的設計圖案。

想獨一無二嗎?想和全班合力設計IQ light嗎?機會絕無僅有,等你來挑戰!

 

.注意:課程上課時間為4/2330() 09:00~12:00,共6小時,請確定兩個時段都能參與再報名。

參加課程請自備筆電,並於上課前安裝好Beam Studio(穩定版)
(
可兩位同學共用一台筆電,不建議三人以上共用喔!)

專業認證:全程參與本課程,即可取得「3D 掃描器」認證資格

📅 活動詳細資訊

參加對象:限本校教職員工生

活動備註:
    1. 圖書館因辦理推廣業務所需,將會拍攝活動照片或進行錄影、錄音。
    2. 肖像權說明:報名參加活動者視為同意將參與本活動之肖像權授權予本館,作為推廣使用。

🔗 報名連結

點此報名:https://cal.lib.nchu.edu.tw/?defcoid=1820

名額有限,額滿為止!

快來體驗雷射雕刻切割機 的魅力,帶走屬於你的專業認證吧!







[Latest Event] Interdisciplinary Workshop: IQ Light Laser-Cutting Challenge

Complete the course to earn certification for the Laser Engraving & Cutting Machine!
The IQ Light is a unique design by Danish designer Holger Strøm, composed of interlocking quadrilaterals. By varying the number of modules and connection patterns, you can create at least 22 different shapes and sizes.

In this workshop, we go beyond 3D structures into the realm of graphic design! Using laser engraving and cutting technology, you can personalize your IQ Light with your own unique patterns. Want to create something one-of-a-kind? Want to collaborate with your classmates? This is a rare opportunity you don't want to miss!

Event Details:
Time: April 23 & April 30 (Thursdays), 09:30 – 12:00 (Total 6 hours).

Requirement: Attendance at both sessions is mandatory.

Equipment: Please bring your own laptop and pre-install Beam Studio (Stable Version) before the class. (One laptop may be shared by two students; sharing between three or more is not recommended.)

Professional Certification: Participants who complete the full course will receive a certification for the "3D Scanner." (Note: Please verify if this should be Laser Cutter certification).

Registration Information:
Target Audience: NCHU Faculty, Staff, and Students only.

Link: Click here to register  https://cal.lib.nchu.edu.tw/?defcoid=1820

Note: Spots are limited and available on a first-come, first-served basis.

Important Notice:
The library will take photos, videos, or audio recordings for promotional purposes. By registering, you agree to grant the library the right to use your image/likeness for such promotional activities.


點閱數 : 1,162人次
首頁
最新消息
活動快訊
【最新活動】跨領域工作坊:IQ Light 大挑戰
EduXplore AI興學伴 立即體驗